xpdf(1)
NAME
xpdf - Portable Document Format (PDF) file viewer for X (version 3.01)
SYNOPSIS
xpdf [options] [PDF-file [page | +dest]]
DESCRIPTION
Xpdf is a viewer for Portable Document Format (PDF) files. (These are
also sometimes also called 'Acrobat' files, from the name of Adobe's
PDF software.) Xpdf runs under the X Window System on UNIX, VMS, and
OS/2.
To run xpdf, simply type:
xpdf file.pdf
where file.pdf is your PDF file. The file name can be followed by a
number specifying the page which should be displayed first, e.g.:
xpdf file.pdf 18
You can also give a named destination, prefixed with '+' in place of
the page number. (This is only useful with PDF files that provide
named destination targets.)
You can also start xpdf without opening any files:
xpdf
CONFIGURATION FILE
Xpdf reads a configuration file at startup. It first tries to find the
user's private config file, ~/.xpdfrc. If that doesn't exist, it looks
for a system-wide config file, typically /usr/local/etc/xpdfrc (but
this location can be changed when xpdf is built). See the xpdfrc(5)
man page for details.
OPTIONS
Many of the following options can be set with configuration file com-
mands or X resources. These are listed in square brackets with the
description of the corresponding command line option.
-g geometry
Set the initial window geometry. (-geometry is equivalent.) [X
resource: xpdf.geometry]
-title title
Set the window title. By default, the title will be "xpdf:
foo.pdf". [X resource: xpdf.title]
-cmap Install a private colormap. This is ignored on TrueColor visu-
als. [X resource: xpdf.installCmap]
-rgb number
Set the size of largest RGB cube xpdf will try to allocate. The
default is 5 (for a 5x5x5 cube); set to a smaller number to con-
serve color table entries. This is ignored with private col-
ormaps and on TrueColor visuals. [X resource: xpdf.rgbCubeSize]
-rv Set reverse video mode. This reverses the colors of everything
except images. It may not always produce great results for PDF
files which do weird things with color. This also causes the
paper color to default to black. [X resource: xpdf.reverseV-
ideo]
-papercolor color
Set the "paper color", i.e., the background of the page display.
This will not work too well with PDF files that do things like
filling in white behind the text. [X resource: xpdf.paperColor]
-mattecolor color
Set the matte color, i.e., the color used for background outside
the actual page area. [X resource: xpdf.matteColor]
-z zoom
Set the initial zoom factor. A number specifies a zoom percent-
age, where 100 means 72 dpi.You may also specify 'page', to fit
the page to the window size, or 'width', to fit the page width
to the window width. [config file: initialZoom; or X resource:
xpdf.initialZoom]
-cont Start in continuous view mode, i.e., with one vertical scroll
bar for the whole document. [config file: continuousView]
-t1lib yes | no
Enable or disable t1lib (a Type 1 font rasterizer). This
defaults to "yes". [config file: enableT1lib]
-freetype yes | no
Enable or disable FreeType (a TrueType / Type 1 font raster-
izer). This defaults to "yes". [config file: enableFreeType]
-aa yes | no
Enable or disable font anti-aliasing. This defaults to "yes".
[config file: antialias]
-ps PS-file
Set the default file name for PostScript output (i.e., the name
which will appear in the print dialog). This can also be of the
form '|command' to pipe the PostScript through a command. [con-
fig file: psFile]
-paper size
Set the paper size to one of "letter", "legal", "A4", or "A3".
This can also be set to "match", which will set the paper size
to match the size specified in the PDF file. [config file:
psPaperSize]
-paperw size
Set the paper width, in points. [config file: psPaperSize]
-paperh size
Set the paper height, in points. [config file: psPaperSize]
-level1
Generate Level 1 PostScript. The resulting PostScript files
will be significantly larger (if they contain images), but will
print on Level 1 printers. This also converts all images to
black and white. [config file: psLevel]
-enc encoding-name
Sets the encoding to use for text output. The encoding-name
must be defined with the unicodeMap command (see xpdfrc(5)).
This defaults to "Latin1" (which is a built-in encoding). [con-
fig file: textEncoding]
-eol unix | dos | mac
Sets the end-of-line convention to use for text output. [config
file: textEOL]
-opw password
Specify the owner password for the PDF file. Providing this
will bypass all security restrictions.
-upw password
Specify the user password for the PDF file.
-fullscreen
Open xpdf in a full-screen mode, useful for presentations. You
may also want to specify '-bg black' (or similar) with this.
(There is currently no way to switch between window and full-
screen modes on the fly.)
-remote name
Start/contact xpdf remote server with specified name (see the
REMOTE SERVER MODE section below).
-reload
Reload xpdf remote server window (with -remote only).
-raise Raise xpdf remote server window (with -remote only).
-quit Kill xpdf remote server (with -remote only).
-cmd Print commands as they're executed (useful for debugging).
[config file: printCommands]
-q Don't print any messages or errors. [config file: errQuiet]
-cfg config-file
Read config-file in place of ~/.xpdfrc or the system-wide config
file.
-v Print copyright and version information.
-h Print usage information. (-help and --help are equivalent.)
Several other standard X options and resources will work as expected:
-display display
[X resource: xpdf.display]
-fg color
(-foreground is equivalent.) [X resource: xpdf*Foreground]
-bg color
(-background is equivalent.) [X resource: xpdf*Background]
-font font
(-fn is equivalent.) [X resource: xpdf*fontList]
The color and font options only affect the user interface elements, not
the PDF display (the 'paper').
The following X resources do not have command line option equivalents:
xpdf.viKeys
Enables the 'h', 'l', 'k' and 'j' keys for left, right, up, and
down scrolling.
xpdf.toolTipEnable
Enables (if set to true) or disables (if set to false) the tool-
tips on the toolbar buttons.
CONTROLS
On-screen controls, at the bottom of the xpdf window
left/right arrow buttons
Move to the previous/next page.
double left/right arrow buttons
Move backward or forward by ten pages.
dashed left/right arrow buttons
Move backward or forward along the history path.
'Page' entry box
Move to a specific page number. Click in the box to activate
it, type the page number, then hit return.
zoom popup menu
Change the zoom factor (see the description of the -z option
above).
binoculars button
Find a text string.
print button
Bring up a dialog for generating a PostScript file. The dialog
has options to set the pages to be printed and the PostScript
file name. The file name can be '-' for stdout or '|command' to
pipe the PostScript through a command, e.g., '|lpr'.
'?' button
Bring up the 'about xpdf' window.
link info
The space between the '?' and 'Quit' buttons is used to show the
URL or external file name when the mouse is over a link.
'Quit' button
Quit xpdf.
Menu
Pressing the right mouse button will post a popup menu with the follow-
ing commands:
Open...
Open a new PDF file via a file requester.
Open in new window...
Create a new window and open a new PDF file via a file
requester.
Reload Reload the current PDF file. Note that Xpdf will reload the
file automatically (on a page change or redraw) if it has
changed since it was last loaded.
Save as...
Save the current file via a file requester.
Continuous view
Toggles between single page and continuous view modes.
Rotate counterclockwise
Rotate the page 90 degrees counterclockwise.
Rotate clockwise
Rotate the page 90 degrees clockwise. The two rotate commands
are intended primarily for PDF files where the rotation isn't
correctly specified in the file.
Close Close the current window. If this is the only open window, the
document is closed, but the window is left open (i.e., this menu
command won't quit xpdf).
Quit Quit xpdf.
Outline
If the PDF contains an outline (a.k.a., bookmarks), there will be an
outline pane on the left side of the window. The width of the outline
pane is adjustable with a vertical split bar via the knob near its bot-
tom end.
Text selection
Dragging the mouse with the left button held down will highlight an
arbitrary rectangle. Any text inside this rectangle will be copied to
the X selection buffer.
Links
Clicking on a hyperlink will jump to the link's destination. A link to
another PDF document will make xpdf load that document. A 'launch'
link to an executable program will display a dialog, and if you click
'ok', execute the program. URL links call an external command (see the
WEB BROWSERS section below).
Panning
Dragging the mouse with the middle button held down pans the window.
Key bindings
o Open a new PDF file via a file requester.
r Reload the current PDF file. Note that Xpdf will reload the
file automatically (on a page change or redraw) if it has
changed since it was last loaded.
control-L
Redraw the current page.
control-W
Close the current window.
f or control-F
Find a text string.
control-G
Find next occurrence.
control-P
Print.
n Move to the next page. Scrolls to the top of the page, unless
scroll lock is turned on.
p Move to the previous page. Scrolls to the top of the page,
unless scroll lock is turned on.
<Space> or <PageDown> or <Next>
Scroll down on the current page; if already at bottom, move to
next page.
<Backspace> or <Delete> or <PageUp> or <Previous>
Scroll up on the current page; if already at top, move to previ-
ous page.
v Move forward along the history path.
b Move backward along the history path.
<Home> Scroll to top of current page.
<End> Scroll to bottom of current page.
control-<Home>
Scroll to first page of document.
control-<End>
Scroll to last page of document.
arrows Scroll the current page.
g Activate the page number text field ("goto page").
0 Set the zoom factor to 125%.
+ Zoom in (increment the zoom factor by 1).
- Zoom out (decrement the zoom factor by 1).
z Set the zoom factor to 'page' (fit page to window).
w Set the zoom factor to 'width' (fit page width to window).
q Quit xpdf.
WEB BROWSERS
If you want to run xpdf automatically from netscape or mosaic (and
probably other browsers) when you click on a link to a PDF file, you
need to edit (or create) the files .mime.types and .mailcap in your
home directory. In .mime.types add the line:
application/pdf pdf
In .mailcap add the lines:
# Use xpdf to view PDF files.
application/pdf; xpdf -q %s
Make sure that xpdf is on your executable search path.
When you click on a URL link in a PDF file, xpdf will execute the com-
mand specified by the urlCommand config file option, replacing an
occurrence of '%s' with the URL. For example, to call netscape with
the URL, add this line to your config file:
urlCommand "netscape -remote 'openURL(%s)'"
REMOTE SERVER MODE
Xpdf can be started in remote server mode by specifying a server name
(in addition to the file name and page number). For example:
xpdf -remote myServer file.pdf
If there is currently no xpdf running in server mode with the name
'myServer', a new xpdf window will be opened. If another command:
xpdf -remote myServer another.pdf 9
is issued, a new copy of xpdf will not be started. Instead, the first
xpdf (the server) will load another.pdf and display page nine. If the
file name is the same:
xpdf -remote myServer another.pdf 4
the xpdf server will simply display the specified page.
The -raise option tells the server to raise its window; it can be spec-
ified with or without a file name and page number.
The -quit option tells the server to close its window and exit.
EXIT CODES
The Xpdf tools use the following exit codes:
0 No error.
1 Error opening a PDF file.
2 Error opening an output file.
3 Error related to PDF permissions.
99 Other error.
AUTHOR
The xpdf software and documentation are copyright 1996-2005 Glyph &
Cog, LLC.
SEE ALSO
pdftops(1), pdftotext(1), pdfinfo(1), pdffonts(1), pdftoppm(1), pdfim-
ages(1), xpdfrc(5)
http://www.foolabs.com/xpdf/
17 August 2005 xpdf(1)
Man(1) output converted with
man2html