tiffcp(1)
NAME
tiffcp - copy (and possibly convert) a TIFF file
SYNOPSIS
tiffcp [ options ] src1.tif ... srcN.tif dst.tif
DESCRIPTION
tiffcp combines one or more files created according to the Tag Image
File Format, Revision 6.0 into a single TIFF file. Because the output
file may be compressed using a different algorithm than the input
files, tiffcp is most often used to convert between different compres-
sion schemes.
By default, tiffcp will copy all the understood tags in a TIFF direc-
tory of an input file to the associated directory in the output file.
tiffcp can be used to reorganize the storage characteristics of data in
a file, but it is explicitly intended to not alter or convert the image
data content in any way.
OPTIONS
-b image
subtract the following monochrome image from all others pro-
cessed. This can be used to remove a noise bias from a set of
images. This bias image is typlically an image of noise the
camera saw with its shutter closed.
-B Force output to be written with Big-Endian byte order. This
option only has an effect when the output file is created or
overwritten and not when it is appended to.
-C Suppress the use of ``strip chopping'' when reading images that
have a single strip/tile of uncompressed data.
-c Specify the compression to use for data written to the output
file: none for no compression, packbits for PackBits compres-
sion, lzw for Lempel-Ziv & Welch compression, jpeg for baseline
JPEG compression, zip for Deflate compression, g3 for CCITT
Group 3 (T.4) compression, and g4 for CCITT Group 4 (T.6) com-
pression. By default tiffcp will compress data according to the
value of the Compression tag found in the source file.
The CCITT Group 3 and Group 4 compression algorithms can only be
used with bilevel data.
Group 3 compression can be specified together with several
T.4-specific options: 1d for 1-dimensional encoding, 2d for
2-dimensional encoding, and fill to force each encoded scanline
to be zero-filled so that the terminating EOL code lies on a
byte boundary. Group 3-specific options are specified by
appending a ``:''-separated list to the ``g3'' option; e.g. -c
g3:2d:fill to get 2D-encoded data with byte-aligned EOL codes.
LZW compression can be specified together with a predictor
value. A predictor value of 2 causes each scanline of the out-
put image to undergo horizontal differencing before it is
encoded; a value of 1 forces each scanline to be encoded without
differencing. LZW-specific options are specified by appending a
``:''-separated list to the ``lzw'' option; e.g. -c lzw:2 for
LZW compression with horizontal differencing.
-f Specify the bit fill order to use in writing output data. By
default, tiffcp will create a new file with the same fill order
as the original. Specifying -f lsb2msb will force data to be
written with the FillOrder tag set to LSB2MSB, while -f msb2lsb
will force data to be written with the FillOrder tag set to
MSB2LSB.
-l Specify the length of a tile (in pixels). tiffcp attempts to
set the tile dimensions so that no more than 8 kilobytes of data
appear in a tile.
-L Force output to be written with Little-Endian byte order. This
option only has an effect when the output file is created or
overwritten and not when it is appended to.
-M Suppress the use of memory-mapped files when reading images.
-p Specify the planar configuration to use in writing image data
that has one 8-bit sample per pixel. By default, tiffcp will
create a new file with the same planar configuration as the
original. Specifying -p contig will force data to be written
with multi-sample data packed together, while -p separate will
force samples to be written in separate planes.
-r Specify the number of rows (scanlines) in each strip of data
written to the output file. By default (or when value 0 is
specified), tiffcp attempts to set the rows/strip that no more
than 8 kilobytes of data appear in a strip. If you specify spe-
cial value -1 it will results in infinite number of the rows per
strip. The entire image will be the one strip in that case.
-s Force the output file to be written with data organized in
strips (rather than tiles).
-t Force the output file to be written wtih data organized in tiles
(rather than strips). options can be used to force the resul-
tant image to be written as strips or tiles of data, respec-
tively.
-w Specify the width of a tile (in pixels). tiffcp attempts to set
the tile dimensions so that no more than 8 kilobytes of data
appear in a tile. tiffcp attempts to set the tile dimensions so
that no more than 8 kilobytes of data appear in a tile.
-,={character}
substitute {character} for ',' in parsing image directory
indices in files. This is necessary if filenames contain com-
mas. Note that ',=' with whitespace immediately following will
disable the special meaning of the ',' entirely. See examples.
EXAMPLES
The following concatenates two files and writes the result using LZW
encoding:
tiffcp -c lzw a.tif b.tif result.tif
To convert a G3 1d-encoded TIFF to a single strip of G4-encoded data
the following might be used:
tiffcp -c g4 -r 10000 g3.tif g4.tif
(1000 is just a number that is larger than the number of rows in the
source file.)
To extract a selected set of images from a multi-image TIFF file, the
file name may be immediately followed by a ',' separated list of image
directory indices. The first image is always in directory 0. Thus, to
copy the 1st and 3rd images of image file "album.tif" to "result.tif":
tiffcp album.tif,0,2 result.tif
Given file "CCD.tif" whose first image is a noise bias followed by
images which include that bias, subtract the noise from all those
images following it (while decompressing) with the command:
tiffcp -c none -b CCD.tif CCD.tif,1, result.tif
If the file above were named "CCD,X.tif", the "-,=" option would be
required to correctly parse this filename with image numbers, as fol-
lows:
tiffcp -c none -,=% -b CCD,X.tif CCD,X%1%.tif result.tif
SEE ALSO
pal2rgb(1), tiffinfo(1), tiffcmp(1), tiffmedian(1), tiffsplit(1),
libtiff(3)
February 18, 2001 TIFFCP(1)
Man(1) output converted with
man2html