DOC HOME SITE MAP MAN PAGES GNU INFO SEARCH
 

fscanf(S)


fscanf, scanf, sscanf, vfscanf, vscanf, vsscanf -- convert formatted input

Syntax

cc . . . -lc

   #include <stdio.h>
   

int fscanf(FILE *strm, const char *format, .../* args */);

int scanf(const char *format, .../* args */);

int sscanf(const char *s, const char *format, .../* args */);

#include <stdarg.h>

int vfscanf(FILE *strm, const char *format, va_list args);

int vscanf(const char *format, va_list args);

int vsscanf(const char *s, const char *format, va_list args);

Description

fscanf- convert formatted input read from a named stream

scanf- convert formatted input read from the standard input stream

sscanf- convert formatted input read from a character string

vfscanf- convert formatted input read from a named stream

vscanf- convert formatted input read from the standard input stream

vsscanf- convert formatted input read from a character string

Each function reads characters, interprets them, and stores the results through the arg pointers, under control of the character string format. Each function returns the number of successfully matched and assigned input items, or EOF if the input ended prior any successful matches.

fscanf and vfscanf read from the stream strm.

scanf and vscanf read from the standard input stream, stdin.

sscanf and vsscanf read from the character string s.

The ``v'' functions take their pointer arguments through the single va_list object passed. See varargs(S).

The format consists of zero or more portable white-space characters (blanks, horizontal and vertical tabs, newlines, carriage returns, and form-feeds) which cause single-byte white-space input characters [as defined by isspace, see ctype(S)] to be skipped, zero or more ordinary characters (not %) which must match the next input characters, and zero or more conversion specifications, each of which is introduced by the a % which can result in the matching of a sequence of input characters and possibly the assignment of a converted value.

Each conversion specification takes the following general form and sequence:

   %[pos$][*][width][size]fmt


pos$
An optional entry, consisting of one or more decimal digits followed by a $ character, that specifies the number of the next pointer arg to access. The first arg (just after format) is numbered 1. If this entry is not present, the arg following the most recently used arg will be accessed.

When numbered argument specifications are used, specifying the Nth argument requires that all the preceding arguments, from the first to the (N-1)th, be specified at least once, in a consistent way, in the format string.


*
An optional flag that suppresses the usual assignment of the converted value after a successful match. (No corresponding arg pointer should be present.)

width
An optional entry that consists of one or more decimal digits that specifies the maximum field width. No width limitation will occur by default, except for c and C.

size
An optional hh, h, l (ell), ll, L, j, t or z that specifies other than the default argument pointer type, depending on the fmt specifier:

a, e, f, g
The default argument type is pointer to float; an l changes it to be a pointer to double, and L ll to pointer to long double.

b, o, u, x
The default argument type is pointer to unsigned int; an h changes it to be a pointer to unsigned short int, l to pointer to unsigned long int, and L or ll to pointer to unsigned long long int.

c, s, [...]
The default argument type is pointer to character; an l changes it to a pointer to wchar_t. lc (ls) is a synonym for C (S).

d, i, n
The default argument type is pointer to int; an h changes it to be a pointer to short int, l to pointer to long int, and L or ll to be a pointer to long long int.

If a size appears other than in these combinations, the behavior is undefined.


fmt
A conversion character or sequence (described below) that shows the type of conversion to be applied.

A conversion specification directs the matching and conversion of the next input item; the result is placed in the object pointed to by the corresponding arg unless assignment suppression was indicated by the * flag. The suppression of assignment provides a way of describing an input item that is to be skipped. For all conversion specifiers except c, C, n and [...], leading single-byte white-space characters are skipped. An input item is usually defined as a sequence of non-white-space single-byte characters that extends to the next inappropriate single-byte character or until the maximum field width (if one is specified) is exhausted. For C, S and l[...], the field width instead specifies the number of multibyte characters.

The conversion specifiers and their meanings are:


a, e, f, g
Matches an optionally signed floating number, whose format is the same as expected for the subject string of the strtod function see the strtol(3C) manual page.

b, o, u, x
The default argument type is pointer to unsigned int; an hh changes it to be a pointer to unsigned char, h a pointer to unsigned short, l a pointer to unsigned long int, ll or L a pointer to unsigned long long int, j a pointer to uintmax_t, t a pointer to the unsigned type corresponding to ptrdiff_t, and z a pointer to size_t.

c
Matches a sequence of single-byte characters of the number specified by the field width (1 if no field width is present in the directive). The corresponding argument should be a pointer to the initial element of a character array large enough to accept the sequence. No null character is added. The normal skip over white space is suppressed.

C, lc
Matches a sequence of multibyte characters of the number specified by the field width (1 if no field width is present in the directive). The corresponding argument should be a pointer to the initial element of a wchar_t array large enough to accept the sequence of generated wide characters. No null wide character is added. The normal skip over white space is suppressed.

d, i, n
The default argument type is pointer to int; an hh changes it to be a pointer to signed char, h a pointer to short int, l a pointer to long int, ll or L a pointer to long long int, j a pointer to intmax_t, t a pointer to ptrdiff_t, and z a pointer to ssize_t.

p
Matches a sequence of printable characters as is produced by the fprintf(S) functions' %p conversion. The corresponding argument should be a pointer to a pointer to void. If the input matched is a value converted earlier (during the same program execution), the pointer that results will compare equal to that value; otherwise, the behavior is undefined.

s
Matches a sequence of single-byte characters, optionally delimited by single-byte white-space characters. The corresponding argument should be a pointer to the initial element of a character array large enough to accept the sequence and a terminating null character, which will be added automatically.

S, ls
Matches a sequence of multibyte characters, optionally delimited by single-byte white-space characters. The corresponding argument should be a pointer to the initial element of a wchar_t array large enough to accept the sequence of generated wide characters and a terminating null wide character, which will be added automatically.

[...]
Matches a nonempty sequence of single-byte characters from a set of expected characters (the ``scanset'') as designated by the characters between the brackets (the ``scanlist''), see below. The corresponding argument should be a pointer to the initial element of a character array large enough to accept the sequence and a terminating null character, which will be added automatically.

l[...]
Matches a nonempty sequence of multibyte characters from a set of expected multibyte characters (the ``scanset'') as designated by the multibyte characters between the brackets (the ``scanlist''), see below. The corresponding argument should be a pointer to the initial element of a wchar_t array large enough to accept the sequence of generated wide characters and a terminating null wide character, which will be added automatically.

%
Matches a single %; no assignment is done.

For [...] and l[...], the scanlist consists of all characters up to, but not including, the matching right bracket (]). The first right bracket matches unless the specifier begins with [] or [^], in which case the scanlist includes a ] and the matching one is the second right bracket. The scanset is those characters described by the scanlist unless it begins with a circumflex (^), in which case the scanset is those characters not described by the scanlist that follows the circumflex. The scanlist can describe an inclusive range of characters by low-high where low is not lexically greater than high (and where these endpoints are in the same codeset for l[...] in locales whose multibyte characters have such); otherwise, a dash (-) will stand for itself, as it will when it occurs last in the scanlist, or the first, or the second when a circumflex is first.

If the form of the conversion specification does not match any of the above, the results of the conversion are undefined. Similarly, the results are undefined if there are insufficient pointer args for the format. If the format is exhausted while args remain, the excess args are ignored.

When matching floating numbers, the locale's decimal point character is taken to introduce a fractional portion, the sequences inf and infinity (case ignored) are taken to represent infinities, and the sequence nan[(m)] (case ignored), where the optional parenthesized m consists of zero or more alphanumeric or underscore (_) characters, are taken to represent NaNs (not-a-numbers). Note, however, that the locale's thousands' separator character will not be recognized as such.

If conversion terminates on a conflicting input character, the offending input character is left unread in the input stream. Trailing white space (including newline characters) is left unread unless matched by a directive.

If end-of-file is encountered during input, conversion is terminated. If end-of-file occurs before any characters matching the current directive have been read (other than leading white space where permitted), execution of the current directive terminates with an input failure; otherwise, unless execution of the current directive is terminated with a matching failure, execution of the following directive (other than %n, if any) is terminated with an input failure.

If a truncated sequence (due to reaching end-of-file or a conflicting input character, or because a field width is exhausted) does not form a valid match for the current directive, the directive is terminated with a matching failure.

The success of literal matches and suppressed assignments is not directly determinable other than via the %n directive.

Characters from streams (stdin or strm) are read as if the getc function had been called repeatedly.

Errors

These routines return the number of successfully matched and assigned input items; this number can be zero in the event of an early matching failure. If the input ends before the first matching failure or conversion, EOF is returned.

The functions fscanf and scanf fail when data needs to be read, the file is a regular file, and an attempt was made to read at or beyond the offset maximum associated with the corresponding stream.

Usage

The call to the function scanf:
   int i, n; float x; char name[50];
   n = scanf("%d%f%s", &i, &x, name);

with the input line:

   25 54.32E-1 thompson

will assign to n the value 3, to i the value 25, to x the value 5.432, and name will contain thompson\0.

The call to the function scanf:

   int i; float x; char name[50];
   (void) scanf("%2d%f%*d %[0-9]", &i, &x, name);

with the input line:

   56789 0123 56a72

will assign 56 to i, 789.0 to x, skip 0123, and place the characters 56\0 in name. The next character read from stdin will be a.

The following shows a simple use of vfscanf, a function that reads formatted input from its own connection to /dev/tty.

   #include <stdarg.h>
   #include <stdio.h>
   

static FILE *instream;

int scan(const char *fmt, ...) { va_list ap; int ret;

va_start(ap, fmt); if (instream == 0) { if ((instream = fopen("/dev/tty", "r")) == 0) return EOF; } ret = vfscanf(instream, fmt, ap); va_end(ap); return ret; }

See also

fprintf(S), fwprintf(S), fwscanf(S), getc(S), varargs(S), strtol(S)

Standards conformance

fscanf, scanf and sscanf are conformant with:

X/Open Portability Guide, Issue 3, 1989 ;
ANSI X3.159-1989 Programming Language -- C ;
IEEE POSIX Std 1003.1-1990 System Application Program Interface (API) [C Language] (ISO/IEC 9945-1) ;
and NIST FIPS 151-1


© 2003 Caldera International, Inc. All rights reserved.
SCO OpenServer Release 5.0.7 -- 11 February 2003