DOC HOME SITE MAP MAN PAGES GNU INFO SEARCH
 

fwprintf(S)


fwprintf, swprintf, wprintf, vfwprintf, vswprintf, vwprintf -- print wide/multibyte character formatted output

Syntax

cc . . . -lc

   #include <wchar.h>
   

int fwprintf(FILE *strm, const wchar_t *format, .../* args */);

int swprintf(wchar_t *s, size_t maxsize, const wchar_t *format, .../* args */);

int wprintf(const wchar_t *format, .../* args */);

#include <stdarg.h>

int vfwprintf(FILE *strm, const wchar_t *format, va_arg args);

int vswprintf(wchar_t *s, size_t maxsize, const wchar_t *format, va_arg args);

int vwprintf(const wchar_t *format, va_arg args);

Description

Each of these functions converts, formats, and outputs its args under control of the wide character string format. Each function returns the number of wide/multibyte characters transmitted (not including the terminating null wide character in the case of swprintf and vswprintf) or a negative value if an output error was encountered.

fwprintf and vfwprint place multibyte output on strm.

wprintf and vwprintf place multibyte output on the standard output stream stdout.

swprintf and vswprintf place wide character output, followed by a null wide character (\0), in consecutive wide characters starting at s, limited to no more than maxsize wide characters. If more than maxsize wide characters were requested, the output array will contain exactly maxsize wide characters, with a null wide character being the last (when maxsize is nonzero); a negative value is returned.

The ``v'' functions take their arguments through the single va_arg object passed. See varargs(S).

The format consists of zero or more ordinary wide characters (not %) which are directly copied to the output, and zero or more conversion specifications, each of which is introduced by the a % and results in the fetching of zero or more associated args.

Each conversion specification takes the following general form and sequence:

   %[pos$][flags][width][.prec][size]fmt


pos$
An optional entry, consisting of one or more decimal digits followed by a $ character, that specifies the number of the next arg to access. The first arg (just after format) is numbered 1. If this entry is not present, the arg following the most recently used arg will be accessed.

flags
Zero or more wide characters that change the meaning of the conversion specification. The flag characters and their meanings are:

-
The result of the conversion will be left-justified within the field. (It will be right-justified if this flag is not specified.)

+
The result of a signed conversion will always begin with a sign (+ or -). (It will begin with a sign only when a negative value is converted if this flag is not specified.)

space
If the first wide character of a signed conversion is not a sign, or if a signed conversion results in no wide characters, a space will be prefixed to the result. If the space and + flags both appear, the space flag will be ignored.

#
The value is to be converted to an alternate form, depending on the fmt wide character:

a, A, e, E, f, F, g, G
The result will contain a decimal point wide character, even if no digits follow. (Normally, the decimal point wide character is only present when fractional digits are produced.)

b, B
A nonzero result will have 0b or 0B prefixed to it.

g, G
Trailing zero digits will not be removed from the result, as they normally are.

o
The precision is increased (only when necessary) to force a zero as the first digit.

x, X
A nonzero result will have 0x or 0X prefixed to it.

For other conversions, the behavior is undefined.


0
For all numeric conversions (a, A, e, E, f, F, g, G, b, B, d, i, o, u, x and X), leading zeros (following any indication of sign or base) are used to pad to the field width; no space padding is performed. If the 0 and - flags both appear, the 0 flag will be ignored. For the integer numeric conversions (b, B, d, i, o, u, x and X), if a precision is specified, the 0 flag will be ignored. For other conversions, the behavior is undefined.

´
(an apostrophe) The nonfractional portion of the result of a decimal numeric conversion (d, i, u, f, F, g and G) will be grouped by the current locale's thousands' separator wide character.

width
An optional entry that consists of either one or more decimal digits, or an asterisk (*), or an asterisk followed by one or more decimal digits and a $. It specifies the minimum field width: If the converted value has fewer wide/multibyte characters than the field width, it will be padded (with space by default) on the left or right (see the above flags description) to the field width.

.prec
An optional entry that consists of a period (.) that precedes either zero or more decimal digits, or an asterisk (*), or an asterisk followed by one or more decimal digits and a $. It specifies a value that depends on the fmt wide character:

a, A, e, E, f, F
It specifies the number of fractional digits (those after the decimal point wide character). For the hexadecimal floating conversions (a and A), the number of fractional digits is just sufficient to produce an exact representation of the value (trailing zero digits are removed); for the other conversions, the default number of fractional digits is 6.

b, B, d, i, o, u, x, X
It specifies the minimum number of digits to appear. The default minimum number of digits is 1.

g, G
It specifies the maximum number of significant digits. The default number of significant digits is 6.

s, S
It specifies the maximum number of wide/multibyte characters to output. The default is to take all elements up to the null terminator (the entire string).

If only a period is specified, the precision is taken to be zero. For other conversions, the behavior is undefined.


size
An optional hh, h, l (ell),ll, L, j, t or z that specifies other than the default argument type, depending on the fmt character:

a, A, e, E, f, F, g, G
The default argument type is double; an l is ignored for compatibility with the scanf functions (a float arg will have been promoted to double); an L ll causes a long double arg to be converted.

b, B, o, u, x, X
The default argument type is unsigned int; an hh causes the unsigned int arg to be narrowed to unsigned char before conversion; an h causes the unsigned int arg to be narrowed to unsigned short before conversion; an l causes an unsigned long arg to be converted; an L or ll causes an unsigned long long arg to be converted.

c
The default argument type is int which is converted to a wide character as if by calling btowc before output; an l causes a wchar_t arg to be output. lc is a synonym for C.

d, i
The default argument type is int; an hh causes the int arg to be narrowed to signed char before conversion; an h causes the int arg to be narrowed to short before conversion; an l causes a long arg to be converted; an L or ll causes a long long arg to be converted.

n
The default argument type is pointer to int; an h changes it to be a pointer to short, an l to pointer to long, and L or ll to pointer to long long.

s
The default argument type is pointer the first element of a character array; an l changes it to be a pointer to the first element of a wchar_t array. ls is a synonym for S.

If a size appears other than in these combinations, the behavior is undefined.


fmt
A conversion wide character (described below) that shows the type of conversion to be applied.

When a field width or precision includes an asterisk (*), an int arg supplies the width or precision value, and is said to be ``indirect''. A negative indirect field width value is taken as a - flag followed by a positive field width. A negative indirect precision value will be taken as zero. When an indirect field width or precision includes a $, the decimal digits similarly specify the number of the arg that supplies the field width or precision. Otherwise, an int arg following the most recently used arg will be accessed for the indirect field width, or precision, or both, in that order; the arg to be converted immediately follows these. Thus, if a conversion specification includes pos$ as well as a $-less indirect field width, or precision, or both, pos is taken to be the number of the int arg used for the first $-less indirection, not the arg to be converted.

When numbered argument specifications are used, specifying the Nth argument requires that all the preceding arguments, from the first to the (N-1)th, be specified at least once, in a consistent way, in the format string.

The conversion wide characters and their meanings are:


a, A
The floating arg is converted to hexadecimal floating notation in the style [-]0xh.hhhp±d. The binary exponent of the converted value (d) is one or more decimal digits. The number of fractional hexadecimal digits h is equal to the precision. If the precision is missing, the result will have just enough digits to represent the value exactly. The value is rounded when fewer fractional digits is specified. If the precision is zero and the # flag is not specified, no decimal point wide character appears. The single digit to the left of the decimal point character is nonzero for normal values. The A conversion specifier produces a value with 0X and P instead of 0x and p.

b, B, o, u, x, X
The unsigned integer arg is converted to unsigned binary (b and B), unsigned octal (o), unsigned decimal (u), or unsigned hexadecimal notation (x and X). The x conversion uses the letters abcdef and the X conversion uses the letters ABCDEF. The precision specifies the minimum number of digits to appear; if the value being converted can be represented in fewer digits, it will be expanded with leading zeros. The default precision is 1. The result of converting a zero value with a precision of zero is no wide characters. A j causes an uintmax_t argument to be converted; a t causes an argument with the unsigned type corresponding to ptrdiff_t to be converted; a z causes a size_t argument to be converted.

c
The integer arg is converted to a wide character as if by calling btowc, and the resulting wide character is output.

C, lc
The wide character wchar_t arg is output.

d, i
The integer arg is converted to signed decimal. The precision specifies the minimum number of digits to appear; if the value being converted can be represented in fewer digits, it will be expanded with leading zeros. The default precision is 1. The result of converting a zero value with a precision of zero is no characters.

e, E
The floating arg is converted to the style [-]d.ddde±dd, where there is one digit before the decimal point character (which is nonzero if the argument is nonzero) and the number of digits after it is equal to the precision. If the precision is missing, it is taken as 6; if the precision is zero and the # flag is not specified, no decimal point wide character appears. The value is rounded to the appropriate number of digits. The E conversion wide character will produce a number with E instead of e introducing the exponent. The exponent always contains at least two digits. If the value is zero, the exponent is zero.

f, F
The floating arg is converted to decimal notation in the style [-]ddd.ddd, where the number of fractional digits is equal to the precision specification. If the precision is missing, it is taken as 6; if the precision is zero and the # flag is not specified, no decimal point wide character appears. If a decimal point wide character appears, at least one digit appears before it. The value is rounded to the appropriate number of digits.

g, G
The floating arg is converted in style e or f (or in style E or F in the case of a G conversion wide character), with the precision specifying the number of significant digits. If the precision is zero, it is taken as one. The style used depends on the value converted; style e (or E) will be used only if the exponent resulting from the conversion is less than -4 or greater than or equal to the precision. Trailing zeros are removed from the fractional part of the result; a decimal point wide character appears only if it is followed by a digit.

n
The arg is taken to be a pointer to an integer into which is written the number of wide/multibyte characters output so far by this call. No argument is converted.

p
The arg is taken to be a pointer to void. The value of the pointer is converted to an sequence of printable wide characters, which matches those read by the %p conversion of the fwscanf(S) functions.

s
The arg is taken to be a pointer to the first element of an array of characters. Multibyte characters from the array are output up to (but not including) a terminating null character; if a precision is specified, no more than that many wide/multibyte characters are output. If a precision is not specified or is greater than the size of the array, the array must contain a terminating null character. (A null pointer for arg will yield undefined results.)

S, ls
The arg is taken to be a pointer to the first element of an array of wchar_t. Wide characters from the string are output until a null wide character is encountered or the number of wide/multibyte characters given by the precision wide would be surpassed. If the precision specification is missing, it is taken to be infinite. In no case will a partial wide/multibyte character be output.

%
Output a %; no argument is converted.

If the form of the conversion specification does not match any of the above, the results of the conversion are undefined. Similarly, the results are undefined if there are insufficient args for the format. If the format is exhausted while args remain, the excess args are ignored.

If a floating-point value represents an infinity, the output is [±]``inf'', where ``inf'' is infinity or INFINITY when the field width or precision is at least 8 and inf or INF otherwise, the uppercase versions used only for a capitol conversion wide character. Output of the sign follows the rules described above.

If a floating-point value has the internal representation for a NaN (not-a-number), the output is [±]nan[(m)]. Depending on the conversion character, ``nan'' is similarly either nan or NAN. If the represented NaN matches the architecture's default, no (``m'') will be output. Otherwise ``m'' represents the bits from the significand in hexadecimal with abcdef or ABCDEF used, depending on the case of the conversion wide character. Output of the sign follows the rules described above.

Otherwise, the locale's decimal point wide character will be used to introduce the fractional digits of a floating-point value.

A nonexistent or small field width does not cause truncation of a field; if the result of a conversion is wider than the field width, the field is expanded to contain the conversion result. Multibyte characters generated on streams (stdout or strm) are printed as if the putc function had been called repeatedly.

Errors

These functions return the number of wide/multibyte characters transmitted (not counting the terminating null wide character for swprintf and vswprintf), or return a negative value if an error was encountered.

Usage

To print a date and time in the form ``Sunday, July 3, 10:02,'' where weekday and month are pointers to null-terminated strings:
   wprintf(L"%s, %s %i, %d:%.2d", 
           weekday, month, day, hour, min);

To print GREEK SMALL LETTER PI to 5 decimal places:

   wprintf(L"pi = %.5f", 4 * atan(1.0));

The following two calls to wprintf both produce the same result of 10 10 00300 10:

   wprintf(L"%d %1$d %.*d %1$d", 10, 5, 300);
   wprintf(L"%d %1$d %3$.*2$d %1$d", 10, 5, 300);

The following shows a simple use of vfwprintf, a function that writes formatted output to stderr by default.

#include <stdarg.h>
#include <stdio.h>

void errwprintf(FILE *fp, const wchar_t *fmt, ...)
{
va_list ap;

va_start(ap, fmt);
if (fp == 0)
fp = stderr;
(void)vfwprintf(fp, fmt, ap);
va_end(ap);
}

See also

abort(S), ecvt(S), exit(S), fprintf(S), fscanf(S), fwscanf(S), lseek(S), putc(S), setlocale(S), varargs(S), write(S)
© 2003 Caldera International, Inc. All rights reserved.
SCO OpenServer Release 5.0.7 -- 11 February 2003