DOC HOME SITE MAP MAN PAGES GNU INFO SEARCH
 

scrollbar(n)




______________________________________________________________________________


NAME

       scrollbar - Create and manipulate scrollbar widgets


SYNOPSIS

       scrollbar pathName ?options?


STANDARD OPTIONS

       -activebackground     -highlightcolor      -repeatdelay
       -background           -highlightthickness  -repeatinterval
       -borderwidth          -jump                -takefocus
       -cursor               -orient              -troughcolor
       -highlightbackground  -relief

       See the options manual entry for details on the standard options.


WIDGET-SPECIFIC OPTIONS

       Command-Line Name:-activerelief
       Database Name:  activeRelief
       Database Class: ActiveRelief

              Specifies  the relief to use when displaying the element that is
              active, if any.  Elements other  than  the  active  element  are
              always displayed with a raised relief.

       Command-Line Name:-command
       Database Name:  command
       Database Class: Command

              Specifies  the  prefix  of a Tcl command to invoke to change the
              view in the widget associated with the scrollbar.  When  a  user
              requests a view change by manipulating the scrollbar, a Tcl com-
              mand is invoked.  The actual command  consists  of  this  option
              followed  by  additional  information  as described later.  This
              option almost always has a value such as .t xview or  .t  yview,
              consisting  of  the  name  of  a widget and either xview (if the
              scrollbar is for horizontal scrolling) or  yview  (for  vertical
              scrolling).   All  scrollable  widgets have xview and yview com-
              mands that take exactly the additional arguments appended by the
              scrollbar as described in SCROLLING COMMANDS below.

       Command-Line Name:-elementborderwidth
       Database Name:  elementBorderWidth
       Database Class: BorderWidth

              Specifies  the  width  of borders drawn around the internal ele-
              ments of the scrollbar (the two arrows  and  the  slider).   The
              value  may have any of the forms acceptable to Tk_GetPixels.  If
              this value is less than  zero,  the  value  of  the  borderWidth
              option is used in its place.

       Command-Line Name:-width
       Database Name:  width
       Database Class: Width

              Specifies  the desired narrow dimension of the scrollbar window,
              not including 3-D border, if any.  For vertical scrollbars  this
              will be the width and for horizontal scrollbars this will be the
              height.  The value may have  any  of  the  forms  acceptable  to
              Tk_GetPixels.
_________________________________________________________________


DESCRIPTION

       The scrollbar command creates a new window (given by the pathName argu-
       ment) and makes  it  into  a  scrollbar  widget.   Additional  options,
       described  above, may be specified on the command line or in the option
       database to configure aspects of the scrollbar such as its colors, ori-
       entation, and relief.  The scrollbar command returns its pathName argu-
       ment.  At the time this command is invoked, there must not exist a win-
       dow named pathName, but pathName's parent must exist.

       A  scrollbar  is  a widget that displays two arrows, one at each end of
       the scrollbar, and a slider in the middle portion of the scrollbar.  It
       provides information about what is visible in an associated window that
       displays a document of some sort (such as a  file  being  edited  or  a
       drawing).   The  position and size of the slider indicate which portion
       of the document is visible in the associated window.  For  example,  if
       the  slider  in  a  vertical scrollbar covers the top third of the area
       between the two arrows, it means that the  associated  window  displays
       the top third of its document.

       Scrollbars  can  be used to adjust the view in the associated window by
       clicking or dragging with the mouse.  See the  BINDINGS  section  below
       for details.


ELEMENTS

       A scrollbar displays five elements, which are referred to in the widget
       commands for the scrollbar:

       arrow1    The top or left arrow in the scrollbar.

       trough1   The region between the slider and arrow1.

       slider    The rectangle that indicates what is visible in  the  associ-
                 ated widget.

       trough2   The region between the slider and arrow2.

       arrow2    The bottom or right arrow in the scrollbar.


WIDGET COMMAND

       The scrollbar command creates a new Tcl command whose name is pathName.
       This command may be used to invoke various operations  on  the  widget.
       It has the following general form:
              pathName option ?arg arg ...?
       Option  and  the args determine the exact behavior of the command.  The
       following commands are possible for scrollbar widgets:

       pathName activate ?element?
              Marks the element indicated by element as active,  which  causes
              it  to  be  displayed  as  specified by the activeBackground and
              activeRelief options.  The only  element  values  understood  by
              this  command are arrow1, slider, or arrow2.  If any other value
              is specified then no element of the scrollbar  will  be  active.
              If element is not specified, the command returns the name of the
              element that is currently active, or an empty string if no  ele-
              ment is active.

       pathName cget option
              Returns  the  current value of the configuration option given by
              option.  Option may have any  of  the  values  accepted  by  the
              scrollbar command.

       pathName configure ?option? ?value option value ...?
              Query  or modify the configuration options of the widget.  If no
              option is specified, returns a list describing all of the avail-
              able  options for pathName (see Tk_ConfigureInfo for information
              on the format of this list).  If option  is  specified  with  no
              value,  then the command returns a list describing the one named
              option (this list will be identical to the corresponding sublist
              of  the  value  returned  if no option is specified).  If one or
              more option-value pairs are specified, then the command modifies
              the  given widget option(s) to have the given value(s);  in this
              case the command returns an empty string.  Option may  have  any
              of the values accepted by the scrollbar command.

       pathName delta deltaX deltaY
              Returns  a  real  number indicating the fractional change in the
              scrollbar setting that corresponds to a given change  in  slider
              position.   For  example,  if  the  scrollbar is horizontal, the
              result indicates how much the scrollbar setting must  change  to
              move the slider deltaX pixels to the right (deltaY is ignored in
              this case).  If the scrollbar is vertical, the result  indicates
              how  much  the  scrollbar setting must change to move the slider
              deltaY pixels down.  The arguments and the result may be zero or
              negative.

       pathName fraction x y
              Returns a real number between 0 and 1 indicating where the point
              given by x and y lies in the trough area of the scrollbar.   The
              value  0 corresponds to the top or left of the trough, the value
              1 corresponds to the bottom or right,  0.5  corresponds  to  the
              middle,  and  so on.  X and y must be pixel coordinates relative
              to the scrollbar widget.  If x and y refer to  a  point  outside
              the trough, the closest point in the trough is used.

       pathName get
              Returns  the scrollbar settings in the form of a list whose ele-
              ments are the arguments to the most recent set widget command.

       pathName identify x y
              Returns the name of the element under the point given by x and y
              (such  as  arrow1), or an empty string if the point does not lie
              in any element of the scrollbar.  X and y must be pixel  coordi-
              nates relative to the scrollbar widget.

       pathName set first last
              This  command is invoked by the scrollbar's associated widget to
              tell the scrollbar about the current view in  the  widget.   The
              command  takes  two  arguments, each of which is a real fraction
              between 0 and 1.  The fractions describe the range of the  docu-
              ment  that is visible in the associated widget.  For example, if
              first is 0.2 and last is 0.4, it means that the  first  part  of
              the document visible in the window is 20% of the way through the
              document, and the last visible part is 40% of the way through.


SCROLLING COMMANDS

       When the user interacts with the scrollbar, for example by dragging the
       slider,  the  scrollbar  notifies  the  associated  widget that it must
       change its view.  The scrollbar makes the notification by evaluating  a
       Tcl  command  generated from the scrollbar's -command option.  The com-
       mand may take any of the following forms.  In each case, prefix is  the
       contents of the -command option, which usually has a form like .t yview

       prefix moveto fraction
              Fraction is a real number between 0 and 1.   The  widget  should
              adjust  its  view so that the point given by fraction appears at
              the beginning of the widget.  If fraction is 0 it refers to  the
              beginning  of  the document.  1.0 refers to the end of the docu-
              ment, 0.333 refers to a point one-third of the way  through  the
              document, and so on.

       prefix scroll number units
              The  widget  should  adjust its view by number units.  The units
              are defined in whatever way makes sense for the widget, such  as
              characters or lines in a text widget.  Number is either 1, which
              means one unit should scroll off the top or left of the  window,
              or -1, which means that one unit should scroll off the bottom or
              right of the window.

       prefix scroll number pages
              The widget should adjust its view by number pages.  It is up  to
              the  widget  to  define  the meaning of a page;  typically it is
              slightly less than what fits in the window, so that there  is  a
              slight  overlap between the old and new views.  Number is either
              1, which means the next page should become visible, or -1, which
              means that the previous page should become visible.


OLD COMMAND SYNTAX

       In  versions  of  Tk before 4.0, the set and get widget commands used a
       different form.  This form is still supported for backward  compatibil-
       ity,  but  it is deprecated.  In the old command syntax, the set widget
       command has the following form:

       pathName set totalUnits windowUnits firstUnit lastUnit
              In this form the arguments are all integers.   TotalUnits  gives
              the  total  size of the object being displayed in the associated
              widget.  The meaning of one unit depends on the associated  wid-
              get;   for  example,  in a text editor widget units might corre-
              spond to lines of text.  WindowUnits indicates the total  number
              of  units  that  can  fit  in the associated window at one time.
              FirstUnit and lastUnit give the indices of the  first  and  last
              units  currently  visible  in the associated window (zero corre-
              sponds to the first unit of the object).

       Under the old syntax the get widget command  returns  a  list  of  four
       integers,  consisting  of  the  totalUnits, windowUnits, firstUnit, and
       lastUnit values from the last set widget command.

       The commands generated by scrollbars also have a  different  form  when
       the old syntax is being used:

       prefix unit
              Unit  is an integer that indicates what should appear at the top
              or left of the associated widget's  window.   It  has  the  same
              meaning  as the firstUnit and lastUnit arguments to the set wid-
              get command.

       The most recent set widget command determines whether or not to use the
       old syntax.  If it is given two real arguments then the new syntax will
       be used in the future, and if it is given four integer  arguments  then
       the old syntax will be used.


BINDINGS

       Tk  automatically  creates class bindings for scrollbars that give them
       the following default behavior.  If the behavior is different for  ver-
       tical  and  horizontal scrollbars, the horizontal behavior is described
       in parentheses.

       [1]    Pressing button 1 over arrow1 causes the view in the  associated
              widget  to  shift  up  (left)  by  one unit so that the document
              appears to move down (right) one unit.  If the  button  is  held
              down, the action auto-repeats.

       [2]    Pressing button 1 over trough1 causes the view in the associated
              widget to shift up (left) by one screenful so that the  document
              appears  to  move  down (right) one screenful.  If the button is
              held down, the action auto-repeats.

       [3]    Pressing button 1 over the slider and dragging causes  the  view
              to  drag  with the slider.  If the jump option is true, then the
              view doesn't drag along with the slider;  it changes  only  when
              the mouse button is released.

       [4]    Pressing button 1 over trough2 causes the view in the associated
              widget to shift down (right) by one screenful so that the  docu-
              ment  appears to move up (left) one screenful.  If the button is
              held down, the action auto-repeats.

       [5]    Pressing button 1 over arrow2 causes the view in the  associated
              widget  to  shift  down (right) by one unit so that the document
              appears to move up (left) one unit.  If the button is held down,
              the action auto-repeats.

       [6]    If  button  2  is pressed over the trough or the slider, it sets
              the view to correspond to  the  mouse  position;   dragging  the
              mouse with button 2 down causes the view to drag with the mouse.
              If button 2 is pressed over one of the  arrows,  it  causes  the
              same behavior as pressing button 1.

       [7]    If  button  1  is pressed with the Control key down, then if the
              mouse is over arrow1 or trough1 the view changes to the very top
              (left)  of the document;  if the mouse is over arrow2 or trough2
              the view changes to the very bottom (right) of the document;  if
              the  mouse is anywhere else then the button press has no effect.

       [8]    In vertical scrollbars the Up and Down keys have the same behav-
              ior  as  mouse  clicks over arrow1 and arrow2, respectively.  In
              horizontal scrollbars these keys have no effect.

       [9]    In vertical scrollbars Control-Up and Control-Down have the same
              behavior as mouse clicks over trough1 and trough2, respectively.
              In horizontal scrollbars these keys have no effect.

       [10]   In horizontal scrollbars the Up and  Down  keys  have  the  same
              behavior  as  mouse clicks over arrow1 and arrow2, respectively.
              In vertical scrollbars these keys have no effect.

       [11]   In horizontal scrollbars Control-Up and  Control-Down  have  the
              same  behavior as mouse clicks over trough1 and trough2, respec-
              tively.  In vertical scrollbars these keys have no effect.

       [12]   The Prior and Next keys have the same behavior as  mouse  clicks
              over trough1 and trough2, respectively.

       [13]   The Home key adjusts the view to the top (left edge) of the doc-
              ument.

       [14]   The End key adjusts the view to the bottom (right edge)  of  the
              document.


EXAMPLE

       Create a window with a scrollable text widget:
              toplevel .tl
              text .tl.t -yscrollcommand {.tl.s set}
              scrollbar .tl.s -command {.tl.t yview}
              grid .tl.t .tl.s -sticky nsew
              grid columnconfigure .tl 0 -weight 1
              grid rowconfigure .tl 0 -weight 1


KEYWORDS

       scrollbar, widget

Tk                                    4.1                         scrollbar(n)

Man(1) output converted with man2html