|
|
Crypt::SSLeay - OpenSSL support for LWP
lwp-request https://www.example.com
use LWP::UserAgent;
my $ua = LWP::UserAgent->new;
my $req = HTTP::Request->new('GET', 'https://www.example.com/');
my $res = $ua->request($req);
print $res->content, "\n";
This document describes Crypt::SSLeay version 0.56, released
2007-07-10.
This perl module provides support for the https protocol under LWP,
to allow an LWP::UserAgent object to perform GET, HEAD and POST
requests. Please see LWP for more information on POST requests.
The Crypt::SSLeay package provides Net::SSL, which is loaded
by LWP::Protocol::https for https requests and provides the
necessary SSL glue.
This distribution also makes following deprecated modules available:
Crypt::SSLeay::CTX Crypt::SSLeay::Conn Crypt::SSLeay::X509
Work on Crypt::SSLeay has been continued only to provide https support for the LWP (libwww-perl) libraries.
The following environment variables change the way
Crypt::SSLeay and Net::SSL behave.
# proxy support
$ENV{HTTPS_PROXY} = 'http://proxy_hostname_or_ip:port';
# proxy_basic_auth
$ENV{HTTPS_PROXY_USERNAME} = 'username';
$ENV{HTTPS_PROXY_PASSWORD} = 'password';
# debugging (SSL diagnostics)
$ENV{HTTPS_DEBUG} = 1;
# default ssl version
$ENV{HTTPS_VERSION} = '3';
# client certificate support
$ENV{HTTPS_CERT_FILE} = 'certs/notacacert.pem';
$ENV{HTTPS_KEY_FILE} = 'certs/notacakeynopass.pem';
# CA cert peer verification
$ENV{HTTPS_CA_FILE} = 'certs/ca-bundle.crt';
$ENV{HTTPS_CA_DIR} = 'certs/';
# Client PKCS12 cert support
$ENV{HTTPS_PKCS12_FILE} = 'certs/pkcs12.pkcs12';
$ENV{HTTPS_PKCS12_PASSWORD} = 'PKCS12_PASSWORD';
You must have OpenSSL or SSLeay installed before compiling this module. You can get the latest OpenSSL package from:
http://www.openssl.org/
On Debian systems, you will need to install the libssl-dev package, at least for the duration of the build (it may be removed afterwards).
Other package-based systems may require something similar. The key is that Crypt::SSLeay makes calls to the OpenSSL library, and how to do so is specified in the C header files that come with the library. Some systems break out the header files into a separate package from that of the libraries. Once the program has been built, you don't need the headers any more.
When installing openssl make sure your config looks like:
./config --openssldir=/usr/local/openssl or ./config --openssldir=/usr/local/ssl
If you are planning on upgrading the default OpenSSL libraries on a system like RedHat, (not recommended), then try something like:
./config --openssldir=/usr --shared
The --shared option to config will set up building the .so shared libraries which is important for such systems. This is followed by:
make make test make install
This way Crypt::SSLeay will pick up the includes and libraries automatically. If your includes end up going into a separate directory like /usr/local/include, then you may need to symlink /usr/local/openssl/include to /usr/local/include
The latest Crypt::SSLeay can be found at your nearest CPAN, as well as:
http://search.cpan.org/dist/Crypt-SSLeay/
Once you have downloaded it, Crypt::SSLeay installs easily
using the make * commands as shown below.
perl Makefile.PL make make test make install
* use nmake or dmake on Win32
For unattended (batch) installations, to be absolutely certain that Makefile.PL does not prompt for questions on STDIN, set the following environment variable beforehand:
PERL_MM_USE_DEFAULT=1
(This is true for any CPAN module that uses ExtUtils::MakeMaker).
Crypt::SSLeay builds correctly with Strawberry Perl.
For Activestate users, the ActiveState company does not have a
permit from the Canadian Federal Government to distribute cryptographic
software. This prevents Crypt::SSLeay from being distributed as
a PPM package from their repository. See
http://aspn.activestate.com/ASPN/docs/ActivePerl/5.8/faq/ActivePerl-faq2.html#crypto_packages
for more information on this issue.
You may download it from Randy Kobes's PPM repository by using the following command:
ppm install http://theoryx5.uwinnipeg.ca/ppms/Crypt-SSLeay.ppd
An alternative is to add the uwinnipeg.ca PPM repository to your local installation. See http://cpan.uwinnipeg.ca/htdocs/faqs/ppm.html for more details.
It is assumed that the OpenSSL installation is located at
/ssl$root. Define this logical to point to the appropriate
place in the filesystem.
LWP::UserAgent and Crypt::SSLeay have their own versions of proxy support. Please read these sections to see which one is appropriate.
LWP::UserAgent has its own methods of proxying which may work for you and is likely to be incompatible with Crypt::SSLeay proxy support. To use LWP::UserAgent proxy support, try something like:
my $ua = new LWP::UserAgent; $ua->proxy([qw( https http )], "$proxy_ip:$proxy_port");
At the time of this writing, libwww v5.6 seems to proxy https requests fine with an Apache mod_proxy server. It sends a line like:
GET https://www.example.com HTTP/1.1
to the proxy server, which is not the CONNECT request that some proxies would expect, so this may not work with other proxy servers than mod_proxy. The CONNECT method is used by Crypt::SSLeay's internal proxy support.
For native Crypt::SSLeay proxy support of https requests,
you need to set the environment variable HTTPS_PROXY to your
proxy server and port, as in:
# proxy support
$ENV{HTTPS_PROXY} = 'http://proxy_hostname_or_ip:port';
$ENV{HTTPS_PROXY} = '127.0.0.1:8080';
Use of the HTTPS_PROXY environment variable in this way
is similar to LWP::UserAgent-env_proxy()> usage, but calling
that method will likely override or break the Crypt::SSLeay
support, so do not mix the two.
Basic auth credentials to the proxy server can be provided this way:
# proxy_basic_auth
$ENV{HTTPS_PROXY_USERNAME} = 'username';
$ENV{HTTPS_PROXY_PASSWORD} = 'password';
For an example of LWP scripting with Crypt::SSLeay native proxy
support, please look at the eg/lwp-ssl-test script in the
Crypt::SSLeay distribution.
Client certificates are supported. PEM0encoded certificate and private key files may be used like this:
$ENV{HTTPS_CERT_FILE} = 'certs/notacacert.pem';
$ENV{HTTPS_KEY_FILE} = 'certs/notacakeynopass.pem';
You may test your files with the eg/net-ssl-test program, bundled with the distribution, by issuing a command like:
perl eg/net-ssl-test -cert=certs/notacacert.pem \
-key=certs/notacakeynopass.pem -d GET $HOST_NAME
Additionally, if you would like to tell the client where the CA file is, you may set these.
$ENV{HTTPS_CA_FILE} = "some_file";
$ENV{HTTPS_CA_DIR} = "some_dir";
There is no sample CA cert file at this time for testing, but you may configure eg/net-ssl-test to use your CA cert with the -CAfile option. (TODO: then what is the ./certs directory in the distribution?)
To create simple test certificates with OpenSSL, you may run the following command:
openssl req -config /usr/local/openssl/openssl.cnf \
-new -days 365 -newkey rsa:1024 -x509 \
-keyout notacakey.pem -out notacacert.pem
To remove the pass phrase from the key file, run:
openssl rsa -in notacakey.pem -out notacakeynopass.pem
The directives for enabling use of PKCS12 certificates is:
$ENV{HTTPS_PKCS12_FILE} = 'certs/pkcs12.pkcs12';
$ENV{HTTPS_PKCS12_PASSWORD} = 'PKCS12_PASSWORD';
Use of this type of certificate takes precedence over previous certificate settings described. (TODO: unclear? Meaning ``the presence of this type of certificate??)
Crypt::SSLeay tries very hard to connect to any SSL web server accomodating servers that are buggy, old or simply not standards-compliant. To this effect, this module will try SSL connections in this order:
SSL v23 - should allow v2 and v3 servers to pick their best type SSL v3 - best connection type SSL v2 - old connection type
Unfortunately, some servers seem not to handle a reconnect to SSL v3 after a failed connect of SSL v23 is tried, so you may set before using LWP or Net::SSL:
$ENV{HTTPS_VERSION} = 3;
to force a version 3 SSL connection first. At this time only a version 2 SSL connection will be tried after this, as the connection attempt order remains unchanged by this setting.
Many thanks to Gisle Aas for writing this module and many others including libwww, for perl. The web will never be the same :)
Ben Laurie deserves kudos for his excellent patches for better error handling, SSL information inspection, and random seeding.
Thanks to Dongqiang Bai for host name resolution fix when using a proxy.
Thanks to Stuart Horner of Core Communications, Inc. who found the need for building --shared OpenSSL libraries.
Thanks to Pavel Hlavnicka for a patch for freeing memory when using
a pkcs12 file, and for inspiring more robust read() behavior.
James Woodyatt is a champ for finding a ridiculous memory leak that has been the bane of many a Crypt::SSLeay user.
Thanks to Bryan Hart for his patch adding proxy support, and thanks to Tobias Manthey for submitting another approach.
Thanks to Alex Rhomberg for Alpha linux ccc patch.
Thanks to Tobias Manthey for his patches for client certificate support.
Thanks to Daisuke Kuroda for adding PKCS12 certificate support.
Thanks to Gamid Isayev for CA cert support and insights into error messaging.
Thanks to Jeff Long for working through a tricky CA cert SSLClientVerify issue.
Thanks to Chip Turner for patch to build under perl 5.8.0.
Thanks to Joshua Chamas for the time he spent maintaining the module.
Thanks to Jeff Lavallee for help with alarms on read failures (CPAN bug #12444).
If you have downloaded this distribution as of a dependency of another distribution, it's probably due to this module (which is included in this distribution).
A module that offers access to the OpenSSL API directly from Perl.
http://search.cpan.org/dist/Net_SSLeay.pm/
Pointers on where to find OpenSSL binary packages (Windows).
For use of Crypt::SSLeay & Net::SSL with perl's LWP, please
send email to libwww@perl.org.
For OpenSSL or general SSL support please email the
openssl user mailing list at openssl-users@openssl.org.
This includes issues associated with building and installing
OpenSSL on one's system.
Please report all bugs at http://rt.cpan.org/NoAuth/Bugs.html.
This module was originally written by Gisle Aas, and was subsequently maintained by Joshua Chamas. It is currently maintained by David Landgren.
Copyright (c) 2006-2007 David Landgren. Copyright (c) 1999-2003 Joshua Chamas. Copyright (c) 1998 Gisle Aas.
This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself.