DOC HOME SITE MAP MAN PAGES GNU INFO SEARCH
 

MIME::Parser



NAME

MIME::Parser - experimental class for parsing MIME streams


SYNOPSIS

Before reading further, you should see the MIME::Tools manpage to make sure that you understand where this module fits into the grand scheme of things. Go on, do it now. I'll wait.

Ready? Ok...

Basic usage examples

    ### Create a new parser object:
    my $parser = new MIME::Parser;
    ### Tell it where to put things:
    $parser->output_under("/tmp");
    ### Parse an input filehandle:
    $entity = $parser->parse(\*STDIN);
    ### Congratulations: you now have a (possibly multipart) MIME entity!
    $entity->dump_skeleton;          # for debugging

Examples of input

    ### Parse from filehandles:
    $entity = $parser->parse(\*STDIN);
    $entity = $parser->parse(IO::File->new("some command|");
    ### Parse from any object that supports getline() and read():
    $entity = $parser->parse($myHandle);
    ### Parse an in-core MIME message:
    $entity = $parser->parse_data($message);
    ### Parse an MIME message in a file:
    $entity = $parser->parse_open("/some/file.msg");
    ### Parse an MIME message out of a pipeline:
    $entity = $parser->parse_open("gunzip - < file.msg.gz |");
    ### Parse already-split input (as "deliver" would give it to you):
    $entity = $parser->parse_two("msg.head", "msg.body");

Examples of output control

    ### Keep parsed message bodies in core (default outputs to disk):
    $parser->output_to_core(1);
    ### Output each message body to a one-per-message directory:
    $parser->output_under("/tmp");
    ### Output each message body to the same directory:
    $parser->output_dir("/tmp");
    ### Change how nameless message-component files are named:
    $parser->output_prefix("msg");

Examples of error recovery

    ### Normal mechanism:
    eval { $entity = $parser->parse(\*STDIN) };
    if ($@) {
        $results  = $parser->results;
        $decapitated = $parser->last_head;  ### get last top-level head
    }
    ### Ultra-tolerant mechanism:
    $parser->ignore_errors(1);
    $entity = eval { $parser->parse(\*STDIN) };
    $error = ($@ || $parser->last_error);
    ### Cleanup all files created by the parse:
    eval { $entity = $parser->parse(\*STDIN) };
    ...
    $parser->filer->purge;

Examples of parser options

    ### Automatically attempt to RFC-1522-decode the MIME headers?
    $parser->decode_headers(1);             ### default is false
    ### Parse contained "message/rfc822" objects as nested MIME streams?
    $parser->extract_nested_messages(0);    ### default is true
    ### Look for uuencode in "text" messages, and extract it?
    $parser->extract_uuencode(1);           ### default is false
    ### Should we forgive normally-fatal errors?
    $parser->ignore_errors(0);              ### default is true

Miscellaneous examples

    ### Convert a Mail::Internet object to a MIME::Entity:
    @lines = (@{$mail->header}, "\n", @{$mail->body});
    $entity = $parser->parse_data(\@lines);


DESCRIPTION

You can inherit from this class to create your own subclasses that parse MIME streams into MIME::Entity objects.


PUBLIC INTERFACE

Construction

new ARGS...

Class method. Create a new parser object. Once you do this, you can then set up various parameters before doing the actual parsing. For example:

    my $parser = new MIME::Parser;
    $parser->output_dir("/tmp");
    $parser->output_prefix("msg1");
    my $entity = $parser->parse(\*STDIN);

Any arguments are passed into init(). Don't override this in your subclasses; override init() instead.

init ARGS...

Instance method. Initiallize a new MIME::Parser object. This is automatically sent to a new object; you may want to override it. If you override this, be sure to invoke the inherited method.

init_parse

Instance method. Invoked automatically whenever one of the top-level parse() methods is called, to reset the parser to a ``ready'' state.

Altering how messages are parsed

decode_headers [YESNO]

Instance method. Controls whether the parser will attempt to decode all the MIME headers (as per RFC-1522) the moment it sees them. This is not advisable for two very important reasons:

History. This method was once the only out-of-the-box way to deal with attachments whose filenames had non-ASCII characters. However, since MIME-tools 5.4xx this is no longer necessary.

Parameters. If YESNO is true, decoding is done. However, you will get a warning unless you use one of the special ``true'' values:

   "I_NEED_TO_FIX_THIS"
          Just shut up and do it.  Not recommended.
          Provided only for those who need to keep old scripts functioning.
   "I_KNOW_WHAT_I_AM_DOING"
          Just shut up and do it.  Not recommended.
          Provided for those who REALLY know what they are doing.

If YESNO is false (the default), no attempt at decoding will be done. With no argument, just returns the current setting. Remember: you can always decode the headers after the parsing has completed (see MIME::Head::decode()), or decode the words on demand (see the MIME::Words manpage).

extract_nested_messages OPTION

Instance method. Some MIME messages will contain a part of type message/rfc822 ,message/partial or message/external-body: literally, the text of an embedded mail/news/whatever message. This option controls whether (and how) we parse that embedded message.

If the OPTION is false, we treat such a message just as if it were a text/plain document, without attempting to decode its contents.

If the OPTION is true (the default), the body of the message/rfc822 or message/partial part is parsed by this parser, creating an entity object. What happens then is determined by the actual OPTION:

NEST or 1

The default setting. The contained message becomes the sole ``part'' of the message/rfc822 entity (as if the containing message were a special kind of ``multipart'' message). You can recover the sub-entity by invoking the parts() method on the message/rfc822 entity.

REPLACE

The contained message replaces the message/rfc822 entity, as though the message/rfc822 ``container'' never existed.

Warning: notice that, with this option, all the header information in the message/rfc822 header is lost. This might seriously bother you if you're dealing with a top-level message, and you've just lost the sender's address and the subject line. :-/.

Thanks to Andreas Koenig for suggesting this method.

extract_uuencode [YESNO]

Instance method. If set true, then whenever we are confronted with a message whose effective content-type is ``text/plain'' and whose encoding is 7bit/8bit/binary, we scan the encoded body to see if it contains uuencoded data (generally given away by a ``begin XXX'' line).

If it does, we explode the uuencoded message into a multipart, where the text before the first ``begin XXX'' becomes the first part, and all ``begin...end'' sections following become the subsequent parts. The filename (if given) is accessible through the normal means.

ignore_errors [YESNO]

Instance method. Controls whether the parser will attempt to ignore normally-fatal errors, treating them as warnings and continuing with the parse.

If YESNO is true (the default), many syntax errors are tolerated. If YESNO is false, fatal errors throw exceptions. With no argument, just returns the current setting.

decode_bodies [YESNO]

Instance method. Controls whether the parser should decode entity bodies or not. If this is set to a false value (default is true), all entity bodies will be kept as-is in the original content-transfer encoding.

To prevent double encoding on the output side MIME::Body->is_encoded is set, which tells MIME::Body not to encode the data again, if encoded data was requested. This is in particular useful, when it's important that the content must not be modified, e.g. if you want to calculate OpenPGP signatures from it.

WARNING: the semantics change significantly if you parse MIME messages with this option set, because MIME::Entity resp. MIME::Body *always* see encoded data now, while the default behaviour is working with *decoded* data (and encoding it only if you request it). You need to decode the data yourself, if you want to have it decoded.

So use this option only if you exactly know, what you're doing, and that you're sure, that you really need it.

Parsing an input source

parse_data DATA

Instance method. Parse a MIME message that's already in core. You may supply the DATA in any of a number of ways...

Returns the parsed MIME::Entity on success.

parse INSTREAM

Instance method. Takes a MIME-stream and splits it into its component entities.

The INSTREAM can be given as a readable FileHandle, an IO::File, a globref filehandle (like \*STDIN), or as any blessed object conforming to the IO:: interface (which minimally implements getline() and read()).

Returns the parsed MIME::Entity on success. Throws exception on failure. If the message contained too many parts (as set by max_parts), returns undef.

parse_open EXPR

Instance method. Convenience front-end onto parse(). Simply give this method any expression that may be sent as the second argument to open() to open a filehandle for reading.

Returns the parsed MIME::Entity on success. Throws exception on failure.

parse_two HEADFILE, BODYFILE

Instance method. Convenience front-end onto parse_open(), intended for programs running under mail-handlers like deliver, which splits the incoming mail message into a header file and a body file. Simply give this method the paths to the respective files.

Warning: it is assumed that, once the files are cat'ed together, there will be a blank line separating the head part and the body part.

Warning: new implementation slurps files into line array for portability, instead of using 'cat'. May be an issue if your messages are large.

Returns the parsed MIME::Entity on success. Throws exception on failure.

Specifying output destination

Warning: in 5.212 and before, this was done by methods of MIME::Parser. However, since many users have requested fine-tuned control over how this is done, the logic has been split off from the parser into its own class, MIME::Parser::Filer Every MIME::Parser maintains an instance of a MIME::Parser::Filer subclass to manage disk output (see the MIME::Parser::Filer manpage for details.)

The benefit to this is that the MIME::Parser code won't be confounded with a lot of garbage related to disk output. The drawback is that the way you override the default behavior will change.

For now, all the normal public-interface methods are still provided, but many are only stubs which create or delegate to the underlying MIME::Parser::Filer object.

filer [FILER]

Instance method. Get/set the FILER object used to manage the output of files to disk. This will be some subclass of MIME::Parser::Filer.

output_dir DIRECTORY

Instance method. Causes messages to be filed directly into the given DIRECTORY. It does this by setting the underlying filer() to a new instance of MIME::Parser::FileInto, and passing the arguments into that class' new() method.

Note: Since this method replaces the underlying filer, you must invoke it before doing changing any attributes of the filer, like the output prefix; otherwise those changes will be lost.

output_under BASEDIR, OPTS...

Instance method. Causes messages to be filed directly into subdirectories of the given BASEDIR, one subdirectory per message. It does this by setting the underlying filer() to a new instance of MIME::Parser::FileUnder, and passing the arguments into that class' new() method.

Note: Since this method replaces the underlying filer, you must invoke it before doing changing any attributes of the filer, like the output prefix; otherwise those changes will be lost.

output_path HEAD

Instance method, DEPRECATED. Given a MIME head for a file to be extracted, come up with a good output pathname for the extracted file. Identical to the preferred form:

     $parser->filer->output_path(...args...);

We just delegate this to the underlying filer() object.

output_prefix [PREFIX]

Instance method, DEPRECATED. Get/set the short string that all filenames for extracted body-parts will begin with (assuming that there is no better ``recommended filename''). Identical to the preferred form:

     $parser->filer->output_prefix(...args...);

We just delegate this to the underlying filer() object.

evil_filename NAME

Instance method, DEPRECATED. Identical to the preferred form:

     $parser->filer->evil_filename(...args...);

We just delegate this to the underlying filer() object.

max_parts NUM

Instance method. Limits the number of MIME parts we will parse.

Normally, instances of this class parse a message to the bitter end. Messages with many MIME parts can cause excessive memory consumption. If you invoke this method, parsing will abort with a die() if a message contains more than NUM parts.

If NUM is set to -1 (the default), then no maximum limit is enforced.

With no argument, returns the current setting as an integer

output_to_core YESNO

Instance method. Normally, instances of this class output all their decoded body data to disk files (via MIME::Body::File). However, you can change this behaviour by invoking this method before parsing:

If YESNO is false (the default), then all body data goes to disk files.

If YESNO is true, then all body data goes to in-core data structures This is a little risky (what if someone emails you an MPEG or a tar file, hmmm?) but people seem to want this bit of noose-shaped rope, so I'm providing it. Note that setting this attribute true does not mean that parser-internal temporary files are avoided! Use tmp_to_core() for that.

With no argument, returns the current setting as a boolean.

tmp_recycling [YESNO]

Instance method. Normally, tmpfiles are created when needed during parsing, and destroyed automatically when they go out of scope. But for efficiency, you might prefer for your parser to attempt to rewind and reuse the same file until the parser itself is destroyed.

If YESNO is true (the default), we allow recycling; tmpfiles persist until the parser itself is destroyed. If YESNO is false, we do not allow recycling; tmpfiles persist only as long as they are needed during the parse. With no argument, just returns the current setting.

tmp_to_core [YESNO]

Instance method. Should new_tmpfile() create real temp files, or use fake in-core ones? Normally we allow the creation of temporary disk files, since this allows us to handle huge attachments even when core is limited.

If YESNO is true, we implement new_tmpfile() via in-core handles. If YESNO is false (the default), we use real tmpfiles. With no argument, just returns the current setting.

use_inner_files [YESNO]

Instance method. If you are parsing from a handle which supports seek() and tell(), then we can avoid tmpfiles completely by using IO::InnerFile, if so desired: basically, we simulate a temporary file via pointers to virtual start- and end-positions in the input stream.

If YESNO is false (the default), then we will not use IO::InnerFile. If YESNO is true, we use IO::InnerFile if we can. With no argument, just returns the current setting.

Note: inner files are slower than real tmpfiles, but possibly faster than in-core tmpfiles... so your choice for this option will probably depend on your choice for tmp_to_core() and the kind of input streams you are parsing.

Specifying classes to be instantiated

interface ROLE,[VALUE]

Instance method. During parsing, the parser normally creates instances of certain classes, like MIME::Entity. However, you may want to create a parser subclass that uses your own experimental head, entity, etc. classes (for example, your ``head'' class may provide some additional MIME-field-oriented methods).

If so, then this is the method that your subclass should invoke during init. Use it like this:

    package MyParser;
    @ISA = qw(MIME::Parser);
    ...
    sub init {
        my $self = shift;
        $self->SUPER::init(@_);        ### do my parent's init
        $self->interface(ENTITY_CLASS => 'MIME::MyEntity');
        $self->interface(HEAD_CLASS   => 'MIME::MyHead');
        $self;                         ### return
    }

With no VALUE, returns the VALUE currently associated with that ROLE.

new_body_for HEAD

Instance method. Based on the HEAD of a part we are parsing, return a new body object (any desirable subclass of MIME::Body) for receiving that part's data.

If you set the output_to_core option to false before parsing (the default), then we call output_path() and create a new MIME::Body::File on that filename.

If you set the output_to_core option to true before parsing, then you get a MIME::Body::InCore instead.

If you want the parser to do something else entirely, you can override this method in a subclass.

new_tmpfile [RECYCLE]

Instance method. Return an IO handle to be used to hold temporary data during a parse. The default uses the standard IO::File->new_tmpfile() method unless tmp_to_core() dictates otherwise, but you can override this. You shouldn't need to.

If you do override this, make certain that the object you return is set for binmode(), and is able to handle the following methods:

    read(BUF, NBYTES)
    getline()
    getlines()
    print(@ARGS)
    flush()
    seek(0, 0)

Fatal exception if the stream could not be established.

If RECYCLE is given, it is an object returned by a previous invocation of this method; to recycle it, this method must effectively rewind and truncate it, and return the same object. If you don't want to support recycling, just ignore it and always return a new object.

Parse results and error recovery

last_error

Instance method. Return the error (if any) that we ignored in the last parse.

last_head

Instance method. Return the top-level MIME header of the last stream we attempted to parse. This is useful for replying to people who sent us bad MIME messages.

    ### Parse an input stream:
    eval { $entity = $parser->parse(\*STDIN) };
    if (!$entity) {    ### parse failed!
        my $decapitated = $parser->last_head;
        ...
    }
results

Instance method. Return an object containing lots of info from the last entity parsed. This will be an instance of class MIME::Parser::Results.


OPTIMIZING YOUR PARSER

Maximizing speed

Optimum input mechanisms:

    parse()                    YES (if you give it a globref or a
                                    subclass of IO::File)
    parse_open()               YES
    parse_data()               NO  (see below)
    parse_two()                NO  (see below)

Optimum settings:

    decode_headers()           *** (no real difference; 0 is slightly faster)
    extract_nested_messages()  0   (may be slightly faster, but in
                                    general you want it set to 1)
    output_to_core()           0   (will be MUCH faster)
    tmp_recycling()            1?  (probably, but should be investigated)
    tmp_to_core()              0   (will be MUCH faster)
    use_inner_files()          0   (if tmp_to_core() is 0;
                                    use 1 otherwise)

File I/O is much faster than in-core I/O. Although it seems like slurping a message into core and processing it in-core should be faster... it isn't. Reason: Perl's filehandle-based I/O translates directly into native operating-system calls, whereas the in-core I/O is implemented in Perl.

Inner files are slower than real tmpfiles, but faster than in-core ones. If speed is your concern, that's why you should set use_inner_files(true) if you set tmp_to_core(true): so that we can bypass the slow in-core tmpfiles if the input stream permits.

Native I/O is much faster than object-oriented I/O. It's much faster to use <$foo> than $foo->getline. For backwards compatibilty, this module must continue to use object-oriented I/O in most places, but if you use parse() with a ``real'' filehandle (string, globref, or subclass of IO::File) then MIME::Parser is able to perform some crucial optimizations.

The parse_two() call is very inefficient. Currently this is just a front-end onto parse_data(). If your OS supports it, you're far better off doing something like:

    $parser->parse_open("/bin/cat msg.head msg.body |");

Minimizing memory

Optimum input mechanisms:

    parse()                    YES
    parse_open()               YES
    parse_data()               NO  (in-core I/O will burn core)
    parse_two()                NO  (in-core I/O will burn core)

Optimum settings:

    decode_headers()           *** (no real difference)
    extract_nested_messages()  *** (no real difference)
    output_to_core()           0   (will use MUCH less memory)
    tmp_recycling()            0?  (promotes faster GC if
                                    tmp_to_core is 1)
    tmp_to_core()              0   (will use MUCH less memory)
    use_inner_files()          *** (no real difference, but set it to 1
                                    if you *must* have tmp_to_core set to 1,
                                    so that you avoid in-core tmpfiles)

Maximizing tolerance of bad MIME

Optimum input mechanisms:

    parse()                    *** (doesn't matter)
    parse_open()               *** (doesn't matter)
    parse_data()               *** (doesn't matter)
    parse_two()                *** (doesn't matter)

Optimum settings:

    decode_headers()           0   (sidesteps problem of bad hdr encodings)
    extract_nested_messages()  0   (sidesteps problems of bad nested messages,
                                    but often you want it set to 1 anyway).
    output_to_core()           *** (doesn't matter)
    tmp_recycling()            *** (doesn't matter)
    tmp_to_core()              *** (doesn't matter)
    use_inner_files()          *** (doesn't matter)

Avoiding disk-based temporary files

Optimum input mechanisms:

    parse()                    YES (if you give it a seekable handle)
    parse_open()               YES (becomes a seekable handle)
    parse_data()               NO  (unless you set tmp_to_core(1))
    parse_two()                NO  (unless you set tmp_to_core(1))

Optimum settings:

    decode_headers()           *** (doesn't matter)
    extract_nested_messages()  *** (doesn't matter)
    output_to_core()           *** (doesn't matter)
    tmp_recycling              1   (restricts created files to 1 per parser)
    tmp_to_core()              1
    use_inner_files()          1

If we can use them, inner files avoid most tmpfiles. If you parse from a seekable-and-tellable filehandle, then the internal process_to_bound() doesn't need to extract each part into a temporary buffer; it can use IO::InnerFile (warning: this will slow down the parsing of messages with large attachments).

You can veto tmpfiles entirely. If you might not be parsing from a seekable-and-tellable filehandle, you can set tmp_to_core() true: this will always use in-core I/O for the buffering (warning: this will slow down the parsing of messages with large attachments).

Final resort. You can always override new_tmpfile() in a subclass.


WARNINGS

Multipart messages are always read line-by-line

Multipart document parts are read line-by-line, so that the encapsulation boundaries may easily be detected. However, bad MIME composition agents (for example, naive CGI scripts) might return multipart documents where the parts are, say, unencoded bitmap files... and, consequently, where such ``lines'' might be veeeeeeeeery long indeed.

A better solution for this case would be to set up some form of state machine for input processing. This will be left for future versions.

Multipart parts read into temp files before decoding

In my original implementation, the MIME::Decoder classes had to be aware of encapsulation boundaries in multipart MIME documents. While this decode-while-parsing approach obviated the need for temporary files, it resulted in inflexible and complex decoder implementations.

The revised implementation uses a temporary file (a la tmpfile()) during parsing to hold the encoded portion of the current MIME document or part. This file is deleted automatically after the current part is decoded and the data is written to the ``body stream'' object; you'll never see it, and should never need to worry about it.

Some folks have asked for the ability to bypass this temp-file mechanism, I suppose because they assume it would slow down their application. I considered accomodating this wish, but the temp-file approach solves a lot of thorny problems in parsing, and it also protects against hidden bugs in user applications (what if you've directed the encoded part into a scalar, and someone unexpectedly sends you a 6 MB tar file?). Finally, I'm just not conviced that the temp-file use adds significant overhead.

Fuzzing of CRLF and newline on input

RFC-1521 dictates that MIME streams have lines terminated by CRLF ("\r\n"). However, it is extremely likely that folks will want to parse MIME streams where each line ends in the local newline character "\n" instead.

An attempt has been made to allow the parser to handle both CRLF and newline-terminated input.

Fuzzing of CRLF and newline on output

The "7bit" and "8bit" decoders will decode both a "\n" and a "\r\n" end-of-line sequence into a "\n".

The "binary" decoder (default if no encoding specified) still outputs stuff verbatim... so a MIME message with CRLFs and no explicit encoding will be output as a text file that, on many systems, will have an annoying ^M at the end of each line... but this is as it should be.

Inability to handle multipart boundaries that contain newlines

First, let's get something straight: this is an evil, EVIL practice, and is incompatible with RFC-1521... hence, it's not valid MIME.

If your mailer creates multipart boundary strings that contain newlines when they appear in the message body, give it two weeks notice and find another one. If your mail robot receives MIME mail like this, regard it as syntactically incorrect MIME, which it is.

Why do I say that? Well, in RFC-1521, the syntax of a boundary is given quite clearly:

      boundary := 0*69<bchars> bcharsnospace
      bchars := bcharsnospace / " "
      bcharsnospace :=    DIGIT / ALPHA / "'" / "(" / ")" / "+" /"_"
                   / "," / "-" / "." / "/" / ":" / "=" / "?"

All of which means that a valid boundary string cannot have newlines in it, and any newlines in such a string in the message header are expected to be solely the result of folding the string (i.e., inserting to-be-removed newlines for readability and line-shortening only).

Yet, there is at least one brain-damaged user agent out there that composes mail like this:

      MIME-Version: 1.0
      Content-type: multipart/mixed; boundary="----ABC-
       123----"
      Subject: Hi... I'm a dork!
      This is a multipart MIME message (yeah, right...)
      ----ABC-
       123----
      Hi there!

We have got to discourage practices like this (and the recent file upload idiocy where binary files that are part of a multipart MIME message aren't base64-encoded) if we want MIME to stay relatively simple, and MIME parsers to be relatively robust.

Thanks to Andreas Koenig for bringing a baaaaaaaaad user agent to my attention.


AUTHOR

Eryq (eryq@zeegee.com), ZeeGee Software Inc (http://www.zeegee.com). David F. Skoll (dfs@roaringpenguin.com) http://www.roaringpenguin.com

All rights reserved. This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself.


VERSION

$Revision: 1.20 $ $Date: 2006/03/17 21:03:23 $