DOC HOME SITE MAP MAN PAGES GNU INFO SEARCH
 

Crypt::RIPEMD160



NAME

Crypt::RIPEMD160 - Perl extension for the RIPEMD-160 Hash function


SYNOPSIS

    use Crypt::RIPEMD160;
    
    $context = new Crypt::RIPEMD160;
    $context->reset();
    
    $context->add(LIST);
    $context->addfile(HANDLE);
    
    $digest = $context->digest();
    $string = $context->hexdigest();
    $digest = Crypt::RIPEMD160->hash(SCALAR);
    $string = Crypt::RIPEMD160->hexhash(SCALAR);


DESCRIPTION

The Crypt::RIPEMD160 module allows you to use the RIPEMD160 Message Digest algorithm from within Perl programs.

The module is based on the implementation from Antoon Bosselaers from Katholieke Universiteit Leuven.

A new RIPEMD160 context object is created with the new operation. Multiple simultaneous digest contexts can be maintained, if desired. The context is updated with the add operation which adds the strings contained in the LIST parameter. Note, however, that add('foo', 'bar'), add('foo') followed by add('bar') and add('foobar') should all give the same result.

The final message digest value is returned by the digest operation as a 20-byte binary string. This operation delivers the result of add operations since the last new or reset operation. Note that the digest operation is effectively a destructive, read-once operation. Once it has been performed, the context must be reset before being used to calculate another digest value.

Several convenience functions are also provided. The addfile operation takes an open file-handle and reads it until end-of file in 8192 byte blocks adding the contents to the context. The file-handle can either be specified by name or passed as a type-glob reference, as shown in the examples below. The hexdigest operation calls digest and returns the result as a printable string of hexdecimal digits. This is exactly the same operation as performed by the unpack operation in the examples below.

The hash operation can act as either a static member function (ie you invoke it on the RIPEMD160 class as in the synopsis above) or as a normal virtual function. In both cases it performs the complete RIPEMD160 cycle (reset, add, digest) on the supplied scalar value. This is convenient for handling small quantities of data. When invoked on the class a temporary context is created. When invoked through an already created context object, this context is used. The latter form is slightly more efficient. The hexhash operation is analogous to hexdigest.


EXAMPLES

    use Crypt::RIPEMD160;
    
    $ripemd160 = new Crypt::RIPEMD160;
    $ripemd160->add('foo', 'bar');
    $ripemd160->add('baz');
    $digest = $ripemd160->digest();
    
    print("Digest is " . unpack("H*", $digest) . "\n");

The above example would print out the message

    Digest is f137cb536c05ec2bc97e73327937b6e81d3a4cc9

provided that the implementation is working correctly.

Remembering the Perl motto (``There's more than one way to do it''), the following should all give the same result:

    use Crypt::RIPEMD160;
    $ripemd160 = new Crypt::RIPEMD160;
    die "Can't open /etc/passwd ($!)\n" unless open(P, "/etc/passwd");
    seek(P, 0, 0);
    $ripemd160->reset;
    $ripemd160->addfile(P);
    $d = $ripemd160->hexdigest;
    print "addfile (handle name) = $d\n";
    seek(P, 0, 0);
    $ripemd160->reset;
    $ripemd160->addfile(\*P);
    $d = $ripemd160->hexdigest;
    print "addfile (type-glob reference) = $d\n";
    seek(P, 0, 0);
    $ripemd160->reset;
    while (<P>)
    {
        $ripemd160->add($_);
    }
    $d = $ripemd160->hexdigest;
    print "Line at a time = $d\n";
    seek(P, 0, 0);
    $ripemd160->reset;
    $ripemd160->add(<P>);
    $d = $ripemd160->hexdigest;
    print "All lines at once = $d\n";
    seek(P, 0, 0);
    $ripemd160->reset;
    while (read(P, $data, (rand % 128) + 1))
    {
        $ripemd160->add($data);
    }
    $d = $ripemd160->hexdigest;
    print "Random chunks = $d\n";
    seek(P, 0, 0);
    $ripemd160->reset;
    undef $/;
    $data = <P>;
    $d = $ripemd160->hexhash($data);
    print "Single string = $d\n";
    close(P);


NOTE

The RIPEMD160 extension may be redistributed under the same terms as Perl. The RIPEMD160 algorithm is published in ``Fast Software Encryption, LNCS 1039, D. Gollmann (Ed.), pp.71-82''.

The basic C code implementing the algorithm is covered by the following copyright:

/********************************************************************\ * * FILE: rmd160.c * * CONTENTS: A sample C-implementation of the RIPEMD-160 * hash-function. * TARGET: any computer with an ANSI C compiler * * AUTHOR: Antoon Bosselaers, ESAT-COSIC * DATE: 1 March 1996 * VERSION: 1.0 * * Copyright (c) Katholieke Universiteit Leuven * 1996, All Rights Reserved * \********************************************************************/


RIPEMD-160 test suite results (ASCII):

* message: "" (empty string) hashcode: 9c1185a5c5e9fc54612808977ee8f548b2258d31 * message: "a" hashcode: 0bdc9d2d256b3ee9daae347be6f4dc835a467ffe * message: "abc" hashcode: 8eb208f7e05d987a9b044a8e98c6b087f15a0bfc * message: "message digest" hashcode: 5d0689ef49d2fae572b881b123a85ffa21595f36 * message: "abcdefghijklmnopqrstuvwxyz" hashcode: f71c27109c692c1b56bbdceb5b9d2865b3708dbc * message: "abcdbcdecdefdefgefghfghighijhijkijkljklmklmnlmnomnopnopq" hashcode: 12a053384a9c0c88e405a06c27dcf49ada62eb2b * message: "A...Za...z0...9" hashcode: b0e20b6e3116640286ed3a87a5713079b21f5189 * message: 8 times "1234567890" hashcode: 9b752e45573d4b39f4dbd3323cab82bf63326bfb * message: 1 million times "a" hashcode: 52783243c1697bdbe16d37f97f68f08325dc1528

This copyright does not prohibit distribution of any version of Perl containing this extension under the terms of the GNU or Artistic licences.


AUTHOR

The RIPEMD-160 interface was written by Christian H. Geuer-Pollmann (CHGEUER) (geuer-pollmann@nue.et-inf.uni.siegen.de) and Ken Neighbors (ken@nsds.com).


SEE ALSO

MD5(3pm) and SHA(1).