DOC HOME SITE MAP MAN PAGES GNU INFO SEARCH PRINT BOOK
 
Serial adapters

Digiboard serial adapter

Ports for switches DS2 to DS5 (DS9 for 8 port version) must be strapped starting at the adapter's base address as given in the table and incrementing by 8 for each port.

The following example is for COM1 at 110:

DS2 110
DS3 118
DS4 120
DS5 128
DS6 130
DS7 138
DS8 140
DS9 148
DS1 150

If COM1 is used, then all the ports must be strapped as ``EVEN'' to interrupt request line 4 (see Digiboard documentation). If COM2 is used, then all the ports must be strapped as ``ODD'' to interrupt request line 3 (same notation). Only revision C and later adapters are supported.


Next topic: Olivetti RS232C multiport adapter
Previous topic: CTC Versanet serial adapter

© 2003 Caldera International, Inc. All rights reserved.
SCO OpenServer Release 5.0.7 -- 11 February 2003