Before you start the VM Client,
you must enable SNMP.
SNMP provides diagnostic services,
which are required for using the
voldiag command line diagnostic service.
To enable SNMP:
As the root user, run:
Do you wish to update or remove the SNMP Agent Configuration files?
Please enter: u - to update or r - to remove or enter q to quit [q]
Type u to update the configuration files.
Confirm your selection when prompted.
At the ``Syscontact'' prompt,
enter the name of the person responsible for the system.
At the ``SysLocation'' prompt,
enter the physical location of the system.
For each of the following screens, type q to exit:
The SNMP setup is now complete.
SNMP Community Setup
SNMP Trap Systems Setup
SMUX Peer Setup
Edit the /etc/snmpd.comm file and verify
that the following line appears and is uncommented:
public 0.0.0.0 read
Verifying Volution Manager CA certificates
Managing your system with Caldera Volution Manager
© 2003 Caldera International, Inc. All rights reserved.
SCO OpenServer Release 5.0.7 -- 11 February 2003