Using the building blocks of SMI, objects are defined and given a place as nodes in the object tree. The object tree groups logically related objects together under a subtree. Such a subtree is called a Management Information Base (MIB). Each MIB (except for vendor-specific MIBs under the enterprises portion of the OID tree) has to be registered with an administrative authority, which in turn, assigns a unique OID to the root of the MIB subtree.
An example of a MIB is the Internet TCP/IP MIB, commonly referred to as MIB-II. It includes objects that are associated with TCP/IP variables and SNMP protocol variables. Other MIBs are defined for OSI protocols, Gateway protocols, and other protocols.
The SCO SNMP product supports the standard objects in the following MIBs that are readable and writable. In other words, all writable objects listed can be set and all readable objects can be retrieved using SCO SNMP.
SCO SNMP supports the readable objects in the following MIBs that can be retrieved with SNMP (none of the writable objects can be set).
The SCO SNMP product also supports all the objects under the SNMP Multiplexing (SMUX) group.
Each MIB is divided into logically related groups
of objects. The important ones are:
system, interfaces, tcp, udp,
ip, egp, icmp, and snmp.
These are also the groups under MIB-II.
SCO SNMP supports MIB-II and can therefore
manage all MIB-II objects.
Each object in the MIB has two important characteristics: its object identifier (OID) and its type. Object types are constructed from the fundamental types defined in the SMI.
The system group contains general information about the network node. An example of this is the physical location of the node, for example, ``R&D Facility, 3rd floor machine room.''
The interfaces group contains information about network interfaces, such as Ethernet® and point-to-point links. Information is kept about such items as interface status (for example, up or down), packet counts, and so on.
The rest of the groups contain information about the particular protocol to which they refer. This includes items such as the number of packets received with a particular protocol type and the number of packets received with incorrect checksums.
The IETF RFC1514 defines a Host Resources MIB for use with managing host systems with SNMP. By default, this is not enabled in SCO OpenServer Release 5. The following example details how to activate it.
Select option 1 to install. When the process completes, you see:
Loading Host Resources MIB..........done
"hostmib" 188.8.131.52.184.108.40.206.1 "aintNoThing"
The output should be similar to the following sample excerpt:
Name: hrSystemUptime.0 Value: 118356496
Name: hrSystemDate.0 Value: 07 d0 03 0d 09 06 17 00 2d 00 00